Mike40

Old hobby woodworker (74) with unrealistic ambitions and low output. I'm In it more for the process than the results, but it is nice to see a finished product too. I see a lot of my old woodworking friends on this site who otherwise know me as Stefang.

view all » Latest Blogs

Horn Speakers #4: Marking and More Cutting

This is one of the two 90% finished horns being made. Last time the square segments were marked out and cut into wedges according to the pattern. Now it’s time to mark out for cutting in the scroll saw. This marking was for an earlier...

Horn Speakers #3: Cutting the Wedges to fit the pattern

Here is a teaser so you can get an idea of the size of the horns. Keep in mind that there will be trumpet like ends attached to the horns. I will be making these ends with plywood rings similar to segmented turnings and turn them on my lathe. ...

Horn Speakers #2: Time for the rubber to hit the road

After figuring out that I needed about 56 square pieces of 3/4" plywood all cut to different sizes I marked them out on a baltic birch platter. I had some half of full size platters in the right dimension. Unfortunately I didn’t have room to...

Follow

14 Comments

Martin Sojka ...

Glad to see you here, Mike. Have fun!

shipwright ...

HI Mike!

David L. Whitehurst ...

Hi Mike. I have a few online friends in Norway. I would love to go there to visit. My father was a boat builder and I’ve always been near the water. Denmark is another destination of mine too.

grizzman ...

hey mike glad to see you here, i see you posted your age, 40 is not a bad age to be at…lol…well even if you are 74, m y mother in law lived till 96, so by some standards, your still a young kid…lol..i hope your getting along ok, im not doing so good, my back and leg pain has been keeping me out of the shop, but the last few days im trying to get out there and enjoy myself…i can get another shot in my back soon, im hoping it will help….you take care friend…

lightweightladylefty ...

Mike,

Good to see you over here!

L/W

lanwater ...

Glad to see you here Mike!

Mike40 ...

Martin Thank you, I’m very glad to see you back in the saddle again!

Paul Glad to see you made it back alive. I hope you had a great time on your voyage. I cut the veneers for our little project yesterday and glued paper on the ones for the marquetry picture. I plan to make the packet today and cut it. My fear level is falling fast as everything has gone very smoothly so far. Now I’m worried about the sand shading. One step at a time.

David If you decide to make a trip to Norway please let me know. It would be nice to have a visit from a fellow woodworker and I would be glad to show you around our area with it’s fjords, mountains and coastline. It’s all with a few minutes of where I live. I am located near Stavanger Norway. It rains a lot here, but we just ignore it. We do have some good weather too occasionally.

Bob Good to see you here too. Actually I posted the year I was born, 1940 ( not 1840). Sorry to hear that you are have the pain problems. I plan to keep going until I drop, but I hope that won’t be in the garden, but in the shop. We visit my MIL in the old folks home every Sunday and I’m always surprised to see so many folks my age there, it’s scary. I hope you get well soon so you can enjoy your woodworking again. I always love your projects (creations?). Meanwhile I hope my little poem cheered you up.

L/W and Ian Thanks much to both of you. It’s good to see you here too.

Ellen ...

Mike,
So nice to see so many old friends here. I hope to be doing more although I signed up for 7 Artisan’s Fairs here on Cape Cod from this weekend through the first week in December. While I hope to try some more creative things, I also have to keep up with my inventory… but when everyday is Saturday (retirement), then I should have lots of time.
Ellen

Mike40 ...

Thank you Ellen, same here. One of the big surprises of retiring is that folks usually feel a lot more busy than they expected. This feeling might take awhile to kick in, but I can assure you that it will eventually. The phenomena is caused by our age unperceptively slowing us down while the world keeps spinning at it’s usual rate.

Madts ...

Welcome Mike.

Mike40 ...

Thanks Madts.

mark reed ...

Hey Mike,
thanks for the message. I’m glad to see you here. …… a friend.

Wheaties - Bruce A Wheatcroft ( BAW Woodworking) ...

Mike , just looked at all your creations . Beautiful work . Very impressive talent . Carving is a skill in itself .

Mike40 ...

Hi Bruce and thanks for the kind words. I like trying all kinds of woodworking. I’m new to carving, and I’m having a lot of fun doing it.