I was asked to make an inlay that would help people notice the step into the piano room to prevent them from stumbling. Here is how it went. 😎 All the inlays are a full quarter inch thick so the floors can be sanded in the future. My Porter Cable router died before I got half way through the big mill out. So I ran out and picked up a new Rigid one. 👍🏾 I used a 3/4" rare earth magnet to locate all the flooring staples and marked them with a silver sharpie so I didn’t hit them with the bit. Glued the inlays in with PL Premium (you can glue snot to a Frog with that) and finished with a bit of sanding and satin Varathane. Over all a great unique custom project. And it sure honed up my inlay skills.
My Woodshop is my happy place😎 trimandcraft.ca https://www.facebook.com/Trimandcraft