Planter box

My neighbor was throwing out his cedar playhouse/swingset that his kids outgrew so I helped him and took all the usable lumber. This stuff makes really nice planter boxes and I have enough material for maybe 5 or 6. I told a good friend who’s wife is really into plants that I would make her a nice box, so I set out to make a pyramid shaped one that looks more interesting than the square ones I made before.

Making pyramids is a bear of a job and I decided to have mitred corners to that complicated it slightly more. I started a couple of weeks ago and got the box made but I wasn’t really happy with it. It was sloppy. Not my best work. Yesterday I put the legs on and stared at it a while and decided to make another one so that’s what I did today.

Here’s the “prototype”.

The idea was good but the execution not so much. The mitres were sloppy and I didn’t like the legs or the bottom. And it also felt too big – not really good proportions. Plus it really feels like IKEA furniture. I’m afraid this box can never be moved once filled or it will break.

Every project should have a prototype because so much can be learned. This one was no exception. I put my lessons to use and the one I made today went faster, fit and finish are tight, and it’s proportionally good, as well as being far sturdier than the first. All around success that I’m pleased with.

Here’s the one from today.

In the prototype, I made the sides by cutting each board separately. This really messed up the mitres. Today I cut the sides as panels using my large square that I adapted for cutting mitres.

This worked out a lot better. To get the angles and bevels I found a website that calculates everything for you. It worked great. I even bevelled all the braces, including the corners. The bottom of the braces are recessed, which allowed the bottom to fit inside the box (I didn’t like looking at the bottom in the prototype).

So that’s it. Thanks for looking.

Woods: cedar

Tools: table saw miter saw

Tags: planter box

687 views

5 0
Share Tweet Pin it Embed
Follow

5 Comments

Jack ...

Nice job Brian, great idea for cedar. I have a small supply of it and am going to try a couple planters for the wife. With all the miters and bevels, do you happen to remember that website? Thank you.

Brian ...

http://jansson.us/jcompound.html

There are lots of math websites that do the same thing but they’re usually overly complicated. This site is perfect for carpenters & woodworkers. Good luck! Make a prototype! :-)

a1jim ...

Looks like some trick angles alright nice work.

Brian ...

The thing about cedar planter boxes is that you don’t need perfect material. It always takes on a beautiful grey patina and the boxes last for years. AND – if you keep your eyes open, you can get reclaimed fencing, swingsets, etc for free because people are always throwing it out. The bolt & screw holes don’t matter for planter boxes.

I think cedar is out of fashion for fences and other backyard contraptions. Partly because the price is high today, I’m sure. But also because people think vinyl or whatever is an upgrade over natural wood. I respectfully disagree with that.

Wheaties - Bruce A Wheatcroft ( BAW Woodworking) ...

Good idea and nice job

More Creations Brian

Planter box