Small Ebony Tool Box

This is the first of two fitted tool cases. It’s a small box, only 7 × 6” and 3” tall. The exterior is veneered in Macassar ebony with black edging and a decorative W/B/W line. The carcase is 3/8” Baltic birch ply. The dyed black boxwood edging was a gift from fellow LJ Randy Walton. Thanks Randy!

The tools inside consist of the shapely little Lie-Nielsen mini router plane, and the three different size cutting blades and the depth stop. It’s a precise and carefully crafted tool. It looks right at home in a fitted box. And, I confess to having a thing about taking good care of my tools.

While the Dremel with a Stewart-Macdonald router base is normally my weapon of choice for excavating inlays, there are times when it’s not ideal. Hence, this little router plane. (It can reach into sharp corners, for instance.)

The interior is veneered in amboyna burl. The fitted section (tray?) lifts out to reveal the original documents for the tools. The hinges are heavy extruded brass I purchased from a hardware store in Wales. While they needed to be polished, they’re attractive, well made hinges – and perfect for this box.

The catch was purchased from Andrew Crawford, and is the same piece he uses on his beautiful flute cases. (Perhaps these are available here in the states somewhere, but I’ve not seen them.) I’ve had these in my hardware drawer for three or four years waiting for the right project, and here it is. The box is separated at the center line so the lid will lay flat and out of the way when it’s open.

The monogram is for me, of course, since these are my tools. It is made up of maple, ebony and cherry, cut on my chevalet, then assembled and inlaid into the completed lid. Thanks Paul for the cipher idea. I normally avoid personalizing my boxes, as it tends to reduce their future attractiveness. The finish is French polish over Liberon Spirit Sanding Sealer.

Thanks for looking in… No e-book on this one. It’s a relatively straightforward box, pretty much the same process described in the pepperwood burl box e-book at www.smartboxmaker.com.

Roger

PS: The second fitted tool box will be along soon. It houses my Steve Latta/Lie-Niesen inlaying tools. It should be completed in a week or so.

Woods: ebony amboyna

Tags: box

693 views

6 0
Share Tweet Pin it Embed
Follow

6 Comments

shipwright ...

I like it. You will have to suffer a bunch of “too beautiful to use” comments of course but if we can’t have beautiful things in our shops where we spend our time ……….. you know …. :-)

You do such great work and now that you have a chevy, the sky’s the limit.
Well done and thanks.

lanwater ...

Although I love tools, in this instance I love the box more.
Very fine work.

Mike40 ...

There isn’t much to say about this fine box that isn’t pretty obvious. It just reeks of quality craftsmanship and perhaps opulence as well. I doubt it would be comfortable living in my rather plain, utilitarian shop.

lightweightladylefty ...

Roger,

It is every bit as outstanding as all your boxes . . . a very fitting home for such a fine tool.

L/W

RogerBean ...

Thanks folks,
The generous comments are appreciated.
Roger

a1jim ...

Great box Roger more of your wonderful workmanship.

More Creations RogerBean

Small Ebony Tool Box