Woodworking Forums

1,985 views, 0 by Kelly

Floating Band Saw Cutting Guide / Feather Board

Once in a while, I find I need support material near the blade and a fence or re-saw guide just doesn’t feel right. In the course of one of my [fortunately not well known] notorious goof off sessions (does that qualify as a paradox?), I made...

609 views, 0 by Mark

Mark

New guy

Morning all. I’m the new guy. As I said im my profile I am over at Lumberjocks and have been for a bit. I say a post this A.M. announcing this new site, so I thought I’d drop by. As long as I’m here could some one tell me how to add an avitar...

1,196 views, 0 by Kelly

Powermatic Band Saw Light Modification

Stock, the 14" Powermatic band saw light must bend from behind the machine to the front. Doing so really stresses the goose-neck supporting the light. Even when adjusted, it never seems positioned quite right for a good view of the cut. Too, the...

2,465 views, 0 by Kelly

Powermatic Band Saw Extension Table

I’ve made several 30” circles using my circle cutting jig. Each time, it’s been a struggle holding the right side of the jig, with the material on it, flush with the table. I thought about making a cart, but that seemed like a lot of material,...

3,513 views, 0 by Kelly

Band Saw Angle Cutting Jig

After seeing what others had done using three different colors of wood to make 3-D patterns out of wood, I thought I’d try my hand at it. To aid in the process, I made this jig for my band saw. Of course, one could vary it a bit for the table...

731 views, 0 by bigblockyeti

Unifence mounted pushblock

Has anyone made one before? I’m thinking it might be a good idea to help keep my hands even further from the blade, especially when making thin cuts where having the guard installed isn’t possible.

872 views, 0 by Scrollgirl

Congratulations on the site!

I just wanted to say thanks for the invite and congratulations for the new endeavor. As members – WE are the ones who are going to make this site successful, informative and fun. I have seen so much talent here on the web that I am sure having a...

637 views, 0 by David E.

David E.

Just wanted to say Hi!....

Hi all, Just wanted to introduce myself. I’m David from Jacksonville, FL. I’ve been a DIY guy ever since I was young, and within the last couple years, got more into woodworking. I feel like I’ve come a long way since I started, but I know I...