Blogs 23 results

Workbench / Outfeed Table #1 #2: Workbench/ Outfeed #2

Well after a few days off I started back up on the workbench/outfeed table. I have the cabinet carcases done except 1. I have two 12"×18", (1) 18"×24", (1) 15"×18" (1) 9"×36". All of them are 26 5/8" tall. Now here is the thing, im working the...

Workbench / Outfeed Table #1 #5: Workbench/ Outfeed continued

Well it’s Valentines day and I only got to work a few hours today. So I ripped my frenchcleats today. Im using the back of the workbench for storing. Everthing from my framing nailer to extension cords. Also a lot of F style clamps. Now my wife...

Workbench / Outfeed Table #1 #1: Workbench/ Outfeed

We on Friday the 30th of January I started on my Workbench/ Outfeed Table. I’ll be updating and showing pictures as I go. So far I have the base started. Installed the casters and leveling feet. The both hold 600 lbs each. So far I’ve been using...

Workbench / Outfeed Table #1 #8: Doors, Drawer Fronts & Face Frame

Hello ladies and gents, well I’ve been busy making Doors, drawer fronts & tons of sanding. Well after sanding, I put on two coats of tung oil with a light sanding between the first and second coat with 220 Grit. I needed to knock the raised...

Workbench / Outfeed Table #1 #6: It's Hammer time

Well ladies and gentlemen im feeling much better again. And its Hammer time. Time to start making up time lost from being sick. First, I just wanted to thank you guys & gas for get well wishes and kind words. All of you are great! A great...

Workbench / Outfeed Table #1 #7: Doors all glued up

Well the doors are all glued up and routed. I sanded them to 150 but I qant to go to 180 before putting on the tung oil. Then im heading to slot the top of the carcase’s to accept the lag bolts to attach the main top. Then moving onto sanding...

Workbench / Outfeed Table #1 #10: Drawers Installed

Well the drawers are installed. Need to hang two more doors and make the huge pull out drawer and install that yet.

Workbench / Outfeed Table #1 #4: getting further

Well im making some head way. I did the reinforcement on the bottom beams because of inertia. I have the face frames done, & one on now. I did some edge banding today on a piece for my french cleat section. We’ll see what the weekend brings. ...

Workbench / Outfeed Table #1 #11: wheels go round and round

Well the shop was completely cleaned up over the weekend by my wife and I. we took all the equipment out of the shop. including the new workbench. However, after putting the stuff back in the shop, it was time to move in the sweetheart...

Workbench / Outfeed Table #1 #3: Continued Build of Workbench

Well I have all the cabinet carcase’s done and, all in line. I cut the top that will be attached to all the cabinet carcases to aid in weight distribution down through the cabinets evenly. Just think of it as a header that transfers down weight...